Synthetic Paint

Applied on interior and exterior wooden, plastered and metal surfaces, on vehicles and on above water surfaces of naval vessels. It is unleaded, glossy with high hiding power, resistant against impacts. Is is easy to apply with good spreading and adhetion properties

Chemical Structure: Alkyd resin

Colour:  Color catalog, RAL catalog

Appearance: Viscous liquid.

Gloss (60 °): 80-90

Solid, % (weight): 70-78(105 to 110 ° C for 3 hours)

Density (g/cm3 , 20°C): 1,30-1,40

Viscosity (KU 25°C): 110 +5

VOC Value% (weight): 22-30

Flash point: >38 °C

Appearance  :    White, viscous liquid

Drying Time:

Set to touch drying within 3-4 hours, dust free drying within 6-8 hours and hard drying within 18-24 hours.

Antipas can be used for all steel and iron surfaces. It has excellent hiding power and provides an ideal surface for subsequent topcoat applications.

Chemical Structure: Sentetic alkyd resin

Appearance  : Matt, flat, anticorrosive metal primer.

Color: White, Grey, Red, RAL color chart

Density (gr/cm³, 25˚C): 1,75±0,05

Total Solids (wt%) : 80-88(105 to 110 ° C for 3 hours)

Viscosity (Cps, 25˚C) 120 ± 5 KU(Biuged BGD186, 25ºC)

Volatile Organic Compounds (VOC):  200-300 gr/lt

Flash point: Min. 38 °C

Dilution : 10-15% can be diluted with synthetic thinner.

Drying Time:

Set to touch drying with in 1- 2 hours, dust free drying with in 3-4 hours. Hard drying with in 12 – 15 hours.

It is used for wooden, metal, cements surfaces. It has excellent hiding power and provides an ideal surface for subsequent topcoat applications.

Chemical Structure: Alkyd resin

Colour: White

Appearance: Viscous liquid.

Gloss (60 °): Mat

Solid, % (weight): 83-85(105 to 110 ° C for 3 hours)

Density (g/cm3 , 25°C): 1,65-1,70

Viscosity (KU 25°C): 120 +5

Flash point: >38 °C

Drying Time:

Set to touch drying within 1-3 hours, dust free drying within 4-6 hours and hard drying within 12-18 hours.

Antipas can be used for all steel and iron surfaces. Included shows very good anti-corrosion property oxide pigments with high rates. It has excellent hiding power and provides an ideal surface for subsequent topcoat applications.

Chemical Structure: Sentetic alcyd resin

Appearance  : Matt, flat, anticorrosive metal primer.

Color: Red

Density (gr/cm³, 25˚C): 1,75±0,05

Total Solids (wt%) : 80-85(105 to 110 ° C for 3 hours)

Viscosity (Cps, 25˚C) : 120 ± 5 KU (Biuged BGD186)

Flash point: Min. 38 °C

Dilution : 10-15% can be diluted with synthetic thinner.

Coverage: Approximately 8-10 m2 /L for single coat.

Drying Time:

Set to touch drying with in 1- 2 hours, dust free drying with in 3-4 hours. Hard drying with in 12 – 15 hours.